|
The Punch Marking was developed to comply with the needs for permanent marking. The punchers are electro-magnetically activated, and one or more punchers may be required depending on the individual application. |
 |
The punchers are built into the marking head, which are held against the plate during the marking - while the punchers are conveyed horizontally inside the head in an x-y coordinate system.
MAGNEMAG engineers the control unit including driver especially for actuation and conveyance of the punchers for the punch marking application.
Characteristics:
| Character Type: | Alphanumeric, Chinese, Cyrillic, Farsi, Hindi or other alphabets, classification and company logos may be applied. |
| Character Height: | 6- 20 mm. |
| Penetration: | From 0.2 to 0.5 mm depending on hardness of the material. |
| Material Hardness: | From 300 -700 HB (Brinell Hardness) |
| Temp of material | -10ºC to 1000ºC |
| Marking cycle: | 4.5 sec for marking 1 line with 30 characters with only 9 punchers |
| Suitable For: | Slabs, Billets, Blooms, Plates, Pipes and Profiles |
Features:
| Highly Efficient Punch Marking | Few punchers needed per marking requirement | |
| High Durability | Punchers made of specially designed sintered material | |
| Replacement of Punch Dies | Fast replacement due to one single retaining ring | |
| Eliminated Notch Effect | The high impact force permits the utilisation of blunt angle and slightly dulled tip punch dies. | |
| ”Marking on the Fly” | Punch marking while the product in conveyance |
NUMTEC INTERSTAHL GmbH - MX punch